Hammer Crusher
TPC Series Hammer crusher is a kind of the impact of the rotor with a ring hammer crusher. when materials fed into the crushing cavity from the upper feeding prot. The motor drives the rotocy'r to rotate quickly in crushing chamber. and then impacted, sheared, grinded and crushed by hammer in high-speed moement. and then impacted, sheared, grinded and crushed by hammer in high-speed movement. The sieve plate is installed on the lower part of the rotor, so as to crushed particle size is less than the size of mesh can be discharge through the sieve board, and the crushed stone is large than the openning size of mesh will be left on the sieve board to be grinded and impacted into qualified size, and finally discharge by the sieve board.
1. Withe the MCP series heavy hammer crusher, it doesn't need the secondary crushing process, which can decrease the cost by about 40% and it consume less energy.
2. Compared with Jaw crusher of the same scale output, it can reduce equipment investment by 45%.
3. Compared with castor crusher, it eliminates blockage and adhesion, reduces wear parts consumption and reduces crushing cost by 35% in working environment with wet material and more soil.
4. At the same time, the output can reach from 50 tons to 300 tons according to different varieties.
It is widely used in many industries such as mining, smelting, building materials, roads, railways, water conservancy and chemical industries. It is especially suitable for crushing limestone and stone with a compressive strength of less than 200 MPa.
Model | Max Feed Size mm | Outside Size (Mm) | Poroduction Capacity (t/h) | Motor Power (kw) | Weight (kg) | Overall Domension (L*W*H)(mm) |
TPC-0305 | ≦80 | ≦8 | 1-5 | 5.5 | 600 | 630*380*630 |
TPC-0403 | ≦100 | ≦10 | 5-10 | 11 | 800 | 900*670*860 |
TPC-0604 | ≦120 | ≦15 | 10-22 | 18.5-22 | 1500 | 1200*1050*1200 |
TPC-0806 | ≦150 | ≦15 | 18-40 | 55 | 3100 | 1310*1180*1310 |
TPC-1008 | ≦200 | ≦15 | 25-50 | 75 | 7900 | 1600*1390*1575 |
TPC-1010 | ≦200 | ≦20 | 30-55 | 132 | 8600 | 1800*1590*1775 |
TPC-1312 | ≦250 | ≦25 | 35-65 | 180 | 14000 | 2060*1600*1890 |
1. Advice of model choice.
2. Design and manufacture machines according to customer's special requirements.
3. View our Factory.
To establish long term cooperation, we will regularly call and email our clients, to check the equipment working condition, offer suggestions for maintenance, and if necessary we will pay a visit to clients to solve the problems caused during equipment working.
